Evolution Machine Products, Inc.
LMK Waterjet
Evolution Machine Products, Inc.
835 Fairfield Ave.
Kenilworth, NJ 07033
ph: 9082411978
mike
Production Machining
PRECISION PARTS MANUFACTURED IN OUR CNC MACHINING CENTERS.
- TYPICAL LOT SIZES MAY RANGE FROM 50 PARTS TO THOUSANDS OF PARTS DEPENDING ON PART SIZE.
- HIGH SPEED CNC MILLING INCLUDING 4 AXIS WORK ON SERVO ROTARY INDEXERS
- CNC TURNING UP TO 2.5" BAR WITH AUTOMATED SERVO BAR OR PNUEMATIC BAR LOADERS, OR 10" SWING IN THE CHUCK, SWISS CNC SCREW MACHINE PARTS UP TO .625" (5/8)
- MINIATURE TURNED PARTS IN HIGH VOLUME ON ESCOMATIC COIL FED CAM DRIVEN MACHINES
- WIRE EDM MACHINING AND HOLE POPPING
- WATERJET MACHINING UP TO 80" X 160" AND UP TO 6" THICK OF ALMOST ANY MATERIAL.
ALL PARTS ARE DEBURRED, CHAMFERED, BREAK EDGE, TUMBLED, CLEANED AND PACKAGED FOR DELIVERY ACCORDING TO OUR STRICT GUIDELINES UNLESS OTHERWISE SPECIFIED.
PARTS ARE MANUFACTURED FROM STEEL, STAINLESS STEEL, BRONZE, BRASS, ALUMINUM, MACHINABLE PLASTICS, & EXTRUSIONS. MACHINING OF BRONZE, BRASS, AND ALUMINUM CASTINGS
Quality Assurance
OUR INSPECTION PROCEDURES EXCEED MIL-SPEC AND THAT OF MOST MAJOR SUPPLIERS
Inspections are performed throughout the production process by the machine operators and by inspectors on the plant floor. Instruments are calibrated and we have good selection of measurement equipment: Coordinate Measuring Machine, Optical Comparator, and a full assortment of Jo blocks, surface plates, intrimiks, micrometers, height gauges, plug gauges, thread gauges & verniers.
A full Quality Control Manual is available for review. Quality Assurance based on Mil-I- 45208A
Finishing
- Batch Vibratory Finishing and de-burring, polishing performed at E.M.P.
- Heat Treating
- Electroplating, zinc, electroless nickel, nickel, passivation, chemical etch.*
- Anodizing, clear, black, blue, gold, hard anodize*
- Paint, powder coating*.
*(Finishing services performed by certified vendors)*
Welding and Testing
- Conventional welding
- Laser micro welding
- Non Destructive Testing
- Radiography testing
- Magnetic particle testing
- Fluorescent penetrant testing
- Pressure testing
Prototyping and Development:
EVOLUTION MACHINE PRODUCTS CAN MANUFACTURE PROTOTYPE PARTS, ASSEMBLIES OR SMALL LOT SIZES ON OUR MANUAL EQUIPMENT OR IN OUR CNC MACHINING CENTERS. WE HAVE A LONG HISTORY OF WORKING RELATIONSHIPS WITH ENGINEERS IN PRODUCT DEVELOPMENT, DESIGN, MANUFACTURING AND SUPPORT.
OUR MACHINISTS HAVE WORKED WITH ENGINEERS FROM WELL KNOWN COMPANIES SUCH AS JOHNSON & JOHNSON, IBM, OWENS ILLINOIS,& PITNEY BOWES.
WE CAN ALSO MANUFACTURE CUSTOM TOOLING FOR PRODUCTION MACHINES.& ROBOTS
PRECISION MACHINE PARTS, PRODUCT, & ENGINEERING SUPPORT
PROTOTYPE TO PRODUCTION!
About Waterjet Cutting (by LMK Waterjet)
Waterjet machines serve all areas of Manufacturing, Architectural, Display or any other industry
With no Heat Affected zones to be concerned with, and the ability to cut materials such as: stainless steel, aluminum, steel, brass, titanium, Inconel, Hastalloy, plastics, wood, gasket materials, etc., waterjet cutting may be the best solution for you.Waterjet machines are capable of cutting through 6" thick steel and there is no heat discoloration or hardening.With a large capacity work surface, our machines can cut hundreds or thousands of parts out of a single sheet of material with minimal waste, or we can cut large items for architectural designs, letters and numbers for signage and more.For parts that need additional machine work, there is a full CNC Machine shop in our building.
Custom art and architectural projects welcomed. Design and engineering services available.
Evolution Machine Products, Inc.
835 Fairfield Ave.
Kenilworth, NJ 07033
ph: 9082411978
mike